Dometic™ A&E 3312487.022B RV Power Awning Left Arm Hardware - Standard - White

(No reviews yet) Write a Review
SKU:
DMP-959
MPN:
3312487.022B
Oversized Package:
This product is not eligible for Free Shipping
  • Click to Enlarge
  • Click to Enlarge
  • Click to Enlarge
MSRP: $526.99
$375.00
— You save $151.99

Description

Dometic™ A&E 3312487.022B RV Power Awning Left Arm Hardware - Standard
This is the left side awning arm hardware for the use with Dometic 9100 or 9200 Power Awnings. The extension arm is a crucial component of an RV awning system, as its function is to provide support and tension to the awning fabric, ensuring that it remains taut and stable during use. The extension arm mounts to the RV sidewall and extends outward to support the awning fabric roller tube assembly. When the awning is extended, the extension arm helps to support the weight of the fabric and prevent it from sagging or flapping in the wind. It also provides a stable base for the awning, allowing you to enjoy shade and protection from the elements in comfort.
  • Compatible with 8952002 and 8962002 Series Awning Arm Hardware Systems
  • Standard Style: The most widely used on RVs
  • Adjustable Pitch: Adjust the arm pitch for protection from the weather
  • Gas Strut Support: Equipped with superior awning support
Adjustable Pitch
The pitch adjustment feature of the awning can help to provide better shade or protection from the sun, especially during the morning or late afternoon when the sun is lower in the sky. It can also help to prevent rainwater from pooling on the surface of the awning. To adjust the pitch of the awning, you loosen the knob located on the adjustable arm to move the arm up or down to change the angle of the awning. After you have set the pitch to the desired angle, you can tighten the knob to secure the arm in place.
Gas Strut Support
The replacement arm is equipped with a gas strut designed to provide tension and support to the awning when it is extended. The gas strut creates tension on the awning and helps to keep it in place, even in windy conditions. Additionally, it helps to distribute the weight of the awning and prevent stress on the extension arm and other parts of the RV.
Standard Style
The standard style awning arms are widely used in RVs nowadays, and they come with standard lengths for both the back channel and front channel. They also have a standard pivot point that results in a 13-1/4" drop of the awning when extended.
The hardware back channel may have a slight bow due to the manufacturing process. However, this should not be considered a defect, and upon installation, the hardware will sit flat against the RV. The awning arm hardware is specifically designed to be lightweight and to rely on the strength of the RV's surface for support.
Additional Info
Back Channel Length
65-5/8"
Front Channel Length
64-7/8"
Lower Pivot Height
30-5/16"
Compatible with
8952002.400 and 8962002.400 Awning Hardware Systems
What's Included
1x Awning Arm (LH)
4x Lag Screws
What's Not Included
Awning Tube & Fabric
Awning Motor
View AllClose